TiNCAM 24 Port Layer 3 Managed PoE Switch 4 Combo 4x10G SFP+ Uplink 450W Gigabit Ethernet Switch for Enterprise Network Routing TBC-PSM5324GE-4CF-4TF-EI
| Transmission rate: | 10/100/1000Mbps | Certification: | CE,FCC,RoHS |
| MAC Address Table: | 16K | Switching Capacity: | Up To 792 Gbps |
| Forwarding Rate: | Up To 96 Mpps | Management Port: | 1*Console Port |
| Link Aggregation: | Supports LACP | PoE Standard: | IEEE 802.3af/at |
| POE Ports: | 24*10/100/1000Base-T PoE Ports (POE/POE+)+ 4* 1000 Base-X SFP (Combo) | Uplink Ports: | 4* 1G/10 GE Base-X SFP+ Ports |
| Network management type: | Layer 3 Managed PoE Switch | Safety features: | Port Security, DHCP Snooping, IP Source Guard |
| Communication mode: | Full-Duplex & Half-Duplex | VLAN Support: | 802.1Q VLAN Tagging |
| Management Interface: | Web GUI, CLI, SNMP, Telnet | Operating Temperature: | 0 °C- 45°C |
| Lightning protection: | 6KV | Products Status: | Stock/OEM/SKD |
| Weight: | <5Kg | Dimensions: | 440(L)*285(W)*44.5(H)mm |
| High Light: | 24 Port Layer 3 PoE Switch,450W Gigabit PoE Switch,4x10G SFP+ Uplink Switch |
||
Product Overview
The TBC-PSM5324GE-4CF-4TF-EI is a L3 managed PoE switch. It has 24*10/100/1000Base-T RJ45 ports, 4*1G SFP Combo ports and 4*1/10G SFP+ fiber slot ports. RJ45 ports can support IEEE 802.3af/at standard PoE power supply. single port PoE power reaches 30W, and the maximum PoE output power is 450W. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, building visual access control intercom, etc. through network cable, to meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprise.
Key Features
• Provide -48V DC power for powered devices (PDs), such as IP Phones, WLAN APs, and Bluetooth APs.
• Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W), can supply power to PDs under these two standards.
• Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs).
• Only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging other private standard PoE devices or devices without PoE function.
• Support port power supply prioritization, guarantee the continuous power supply of key nodes.
• Up to 100m network cable transmitting distance, support flexible network expansion without power line deployment concerns. Users can freely fix their wireless APs, IP cameras or other end devices on the wall or ceiling.
• Support short-circuit protection function, the switch will automatically start short-circuit function and cut off the power supply when there is high-current or other power failures, which can efficiently defend against device damage or network failures caused by line fault or wrong installation.
• POE intelligent strategy: POE intelligent diagnosis, POE timing restart, Power supply schedule.
• Support CLI Management ,SNMP Management, simple WEB management, easy to configure the functions of switches.
