TiNCAM 24 Port Gigabit Layer 2 Managed PoE Switch 4 Combo 4x10G SFP+ Uplink 450W 6KV Protection Rackmount Network Switch TBC-PSM5224GE-4CF-4TF
| Transmission rate: | 10/100/1000Mbps | Certification: | CE，FCC，RoHS |
| MAC Address Table: | 16K | Switching Capacity: | Up To 350 Gbps |
| Forwarding Rate: | Up To 96 Mpps | Management Port: | 1*Console Port |
| Link Aggregation: | Supports LACP | PoE Standard: | IEEE 802.3af/at |
| POE Ports: | 24*10/100/1000Base-T PoE Ports (POE/POE+)+ 4* 1000 Base-X SFP (Combo) | Uplink Ports: | 4* 1G/10 GE Base-X SFP+ Ports |
| Network management type: | L2+ Managed Switch | Safety features: | Port Security, DHCP Snooping, IP Source Guard |
| Communication mode: | Full-Duplex & Half-Duplex | VLAN Support: | 802.1Q VLAN Tagging |
| Management Interface: | Web GUI, CLI, SNMP, Telnet | Operating Temperature: | -10°C To 50°C |
| Lightning protection: | 6KV | Products Status: | Stock/OEM/SKD |
| Weight: | <5Kg | Dimensions: | 440(L)*285(W)*44.5(H)mm |
| High Light: | 24 Port Gigabit Managed PoE Switch,Layer 2 PoE Switch 10G SFP+ Uplink,450W Rackmount PoE Switch 6KV Protection |
||
Product Overview
TBC-PSM5224GE-4CF-4TF is a layer 2 10G managed switch, providing 24 10/100/1000Mbps ports, 4 1000Mbps SFP combo ports and 4 1000/10000Mbps SFP+ optical fiber interfaces, which can be used to connect upstream devices with higher bandwidth. Featured with 24 IEEE 802.3at/af-compliant RJ45 ports, it supplies a maximum PoE power output of 450W. The switch can supply power when transmitting data with APs, IP cameras, and IP phones through CAT5 cables.Using store-and-forward technology, combined with dynamic memory allocation, ensure that bandwidth is effectively allocated to each port. With flow control, it can effectively avoid data packet loss. The backup and redundancy capabilities of the line can be realized through load balancing technology. The product has rich business features and is widely used in the access of enterprise networks and campus networks to build high-performance, easy-to-manage, easy-scalable, and low-cost Gigabit-to-desktop solutions for users. Built-in high-reliability and wide-voltage input design power supply, even if the grid voltage is unstable, it can ensure that the equipment can work normally.
Key Features
• Provide -48V DC power for powered devices (PDs), such as IP Phones, WLAN APs, and Bluetooth APs.
• Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W), can supply power to PDs under these two standards.
• Transmitting electronic power together with data through a single network cable, free of power lines.
• Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs).
• Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging other private standard PoE devices or devices without PoE function.
• Support port power supply prioritization, guarantee the continuous power supply of key nodes.
• Up to 100m network cable transmitting distance, support flexible network expansion without power line deployment concerns. Users can freely fix their wireless APs, IP cameras or other end devices on the wall or ceiling.
• Built-in PSE power supply module, plug-and play design, easy to install.
• High security performance defending against power surge.
• Support short-circuit protection function, the switch will automatically start short-circuit function and cut off the power supply when there is high-current or other power failures, which can efficiently defend against device damage or network failures caused by line fault or wrong installation.
• Energy-saving green design, support auto-switch to standby mode and auto-detect cable length. It will stay in standby mode and save the power when the port is disconnected , or provide a lower transmission power when the network cable is less than 10m.
• Support CLI Management ,SNMP Management, simple WEB management, easy to configure the functions of switches.
• PoE schedule to save power.
• Intelligent restart, schedule reset per PoE Port to maintain your IP Cameras,APs and other devices.
TiNCAM 48 Port Gigabit Layer 2 Managed PoE Switch 6x10G SFP+ Uplink 520W Rackmount Ethernet Switch for Enterprise Networks TBC-PSM5248GE-6TF
TiNCAM 48-port Gigabit L2 managed PoE switch with 6x10G SFP+ uplinks, 520W PoE budget, 350Gbps capacity, and 6KV lightning protection. CE/FCC/RoHS certified, it offers LACP, VLAN, SNMP/Web/CLI management, and OEM/SKD options for scalable enterprise networks.
TiNCAM 24 Port Gigabit Managed PoE Switch 2 SFP Fiber Uplink 450W Rackmount Ethernet Switch for IP Surveillance and Enterprise Networks TBC-PSM5224GE-2GF
TiNCAM 24-port Gigabit L2+ managed PoE switch with 450W output, 2 SFP uplinks, and 52Gbps capacity. Features 6KV lightning protection, LACP, VLAN, SNMP/Web/CLI management, and CE/FCC/RoHS certification. Ideal for IP surveillance and enterprise networks, with OEM/custom options available.
TiNCAM 24 Port Gigabit Managed PoE Switch 4 Combo Uplink Ports 450W Rackmount Ethernet Network Switch for Enterprise Networks TBC-PSM5224GE-4CF
TiNCAM 24-port Gigabit managed PoE switch delivers 450W, 6KV lightning protection, and L2+ features like VLAN, LACP, and SNMP. CE/FCC/RoHS certified, it offers OEM/custom options for enterprise networks.
TiNCAM 16 Port Gigabit Managed PoE Switch 2 SFP Uplink 250W Rackmount Ethernet Network Switch for Enterprise Networks TBC-PSM5216GE-2GF
TiNCAM 16-port Gigabit L2+ managed PoE switch with 250W, 2 SFP uplinks, 6KV lightning protection, and robust security. CE, FCC, RoHS certified. OEM/SKD options available for enterprise networks.
- Email:sales8019@sztincam.com
- Tel:+8618566783221
- WhatsApp:8618566783221
- WeChat:+8618566783221
