CH

 
Your location: Home > Product > 155M SFP M…

155M SFP Module single mode dual fiber 80km

The SFP transceivers are high performance, cost effective modules supporting data-rate of 155Mbps and 80km transmission distance with SMF.

The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.  

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA. 


  • Features
  • Parameters
  • Size
  • Information
  • application
  • Download
  • ● Up to 155Mbps data rate operation

    ●1550nm DFB laser and PIN photo detector for 80km transmission 

    ●Compliant with SFP MSA and SFF-8472 with duplex LC receptacle 

    ● Digital Diagnostic Monitor Interface

    ● Very low EMI and excellent ESD protection  

    ● +3.3V single power supply  

    ● RoHS compliant

    ● Case operating temperature

                  Commercial: 0°C to +70°C

                  Extended: -10°C to +80°C

                  Industrial: -40°C to +85°C


  • General Operating Characteristics

    Parameter

    Symbol

    Min.

    Typ.

    Max.

    Unit

    Notes

    Data Rate



    155


    Mb/s


    Supply Voltage

    Vcc

    3.1

    3.3

    3.47

    V


    Supply Current

    Icc



    220

    mA


    Operating Case Temperature

    Tc

    0


    70


    -10


    80

    -45


    85

    Electrical Input/Output Characteristics

    Transmitter

    Parameter

    Symbol

    Min.

    Typ.

    Max.

    Unit

    Notes

    Diff. Input Voltage Swing


    300


    1860

    mVpp

    1

    Tx Disable Input

    H

    VIH

    2.0


    Vcc+0.3

    V


    L

    VIL

    0


    0.8

    Tx Fault Output

    H

    VOH

    2.0


    Vcc+0.3

    V

    2

    L

    VOL

    0


    0.8

    Input Diff. Impedance

    Zin


    100


    Ω


     

     

    Receiver

    Parameter

    Symbol

    Min.

    Typ.

    Max.

    Unit

    Notes

    Diff. Output Voltage Swing


    370


    1800

    mVpp

    3

    Rx LOS Output

    H

    VOH

    2.0


    Vcc+0.3

    V

    2

    L

    VOL

    0


    0.8


    Note 1) TD+/- are internally AC coupled with 100Ω differential termination inside the module.

    Note 2) Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.

    Note 3) RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.

     

     

     

    Optical Characteristics

    ● Transmitter

    Parameter

    Symbol

    Min.

    Type

    Max.

    Unit

    Notes

    Ave. Output Power (Enable)

    Po

    -6


    1

    dBm

    1

    Extinction Ratio

    ER

    10



    dB

    2

    Side mode Suppression Ratio

    SMSR

    30



    dB


    Rise/Fall Time (20%-80%)

    Tr-Tf



    2.5

    ns


    Wavelength Range


    1530

    1550

    1570

    nm


    Spectral Width (RMS)




    1

    nm


    Output Optical Eye

    ITU G.957 Compliant

     

    ● Receiver

    Parameter

    Symbol

    Min.

    Type

    Max.

    Unit

    Notes

    Operating Wavelength


    1270


    1610

    nm


    Sensitivity

    Pimin



    -36

    dBm

    3

    Min. Overload

    Pimax

    -5



    dBm

    3

    Optical Path Penalty




    1

    dB


    LOS Assert

    Pa

    -40



    dBm


    LOS De-assert

    Pd



    -37

    dBm


    LOS Hysteresis

    Pd-Pa

    0.5


    6

    dB


    Note 1) Measured at 155 Mb/s with PRBS 223 – 1 NRZ test pattern.

    Note 2) Unfiltered, measured with a PRBS 223-1 test pattern @155Mbps

    Note 3) Measured at 155 Mb/s with PRBS 223 – 1 NRZ test pattern for BER < 1x10-10


  • 尺寸.jpg

  • ● SDH STM-1, S-1.1,L-1.1, L-1.2

    ● SONET OC-3 IR1,LR1,LR2  

    ● Other optical transmission systems