Shenzhen Tian Bo Communication Equipment Co., Ltd.

Your location： Home > Product > 300Mbps Wir…

300Mbps Wireless 2.4G Bridge CPE

< >

Design of 802.11n 300M Rate Transmission for High-pass Ultra-Strong Stability Chip

8M/64M Flash Configuration

Streamlined appearance, IP65 level shell design

Multi-signal indicator can directly display the signal strength of each distance.

2 Port 10/100 Mbps Adaptive Ethernet Interface, Support Automatic Flip

2.4 G Band Support Spread Spectrum (2.3G-2.7G）

Hard Ware Specification
Main chip	AR9331
Memory	DDR2 64MB （Highest supportDDR2 128MB）
FLASH	SPI 8MB（Highest support16MB）
Protocol standard	IEEE802.11b/802.11g/802.11n/802.3/802.3u
Wireless rate	2.4G 300Mbps
modulation mode	CCK OFDM
Working frequency band	2.4GHZ
RF parameters	11g 54M: 15+/-2dBm @EVM<-25dB TX: 11n MCS7 HT40: 13+/-2dBm @EVM<-28dB
RF parameters	11g 54M: -72+/-2dBm @PER<10% RX: 11n MCS7 HT40: -67+/-2dBm @ PER<10%
antenna	Non-removable 8dBi high gain directional antenna.
Physical interface	A 10/100M adaptive WAN port and a 10/100M adaptive LAN port; Support for Auto MDI/MDIX） One Reset Button and One DC Power Interface
Indicator light	1 power supply lamp, 1 WAN port lamp, 1 LAN lamp, 1 WiFi lamp, 4 signal lamps
The power adapter	DC 12V~18V/1A
Is POE Power Supply Supported?	Non-standard12V~18V 1A
Maximum Power Consumption of Products	< 5W
work environment	Working temperature: - 10 40 Storage temperature: - 40 70 Working humidity: 10% to 90% RH does not condensate Storage humidity: 5% to 90% RH does not condense
Spare parts list	Wire * 1 Warranty Card * 1 Installation Guide * 1 Instruction * 1 Tape * 1 15V/1A Non-standard POE Power Adapter *1